Set your location
Florida
Georgia

AERIAL-PERSONNEL LIFTS

Categories
AERIAL-PERSONNEL LIFTS
PERSONNEL LIFT-30' DC

Synergy Equipment’s Genie AWP25S is a drivable 29 feet 6-inch high mobile vertical lift with a working height of 35-foot 6-inches that is used for painting, installing electrical systems and lights, and other high-reach construction and installation projects. The Genie AWP25S is 29 inches wide, 44.75 inches long and has a stow height of 78 inches. The 27- by 44.75-inch platform is wide enough for a worker and tools and can support up to a 350-pound load. The Genie AWP25S supported by four outriggers that extend out up to 5 feet 1 inch. The Genie AWP30S is tipped back onto casters for moving.

/ day
/ week
/ month
View Full Specs
AERIAL-PERSONNEL LIFTS
PERSONNEL LIFT-25' DC

Synergy Equipment’s Genie AWP25S is a drivable 24-foot 1-inch high mobile vertical lift with a working height of 30 feet 10 inches that is used for painting, installing electrical systems and lights, and other high-reach construction and installation projects. The Genie AWP25S is 29.5 inches wide, 53.5 inches long and has a stow height of 78 inches. The 27- by 44.75-inch platform is wide enough for a worker and tools and can handle up to a 350-pound load. The Genie AWP25S supported by four outriggers that extend out up to 5 feet 1 inch. The Genie AWP25S is tipped back onto casters for moving.

/ day
/ week
/ month
View Full Specs
AERIAL-PERSONNEL LIFTS
PERSONNEL LIFT-20' DC

Synergy Equipment’s JLG 20MVL is a drivable 19-foot high mobile vertical lift that is used for painting, installing electrical systems and lights, and other high-reach construction and installation projects. The JLG 20MVL is 29.5 inches wide, 53.5 inches long and has a stow height of 78 inches. The 28- by 26-inch platform is wide enough for a worker and tools and can handle up to a 350-pound load. The JLG 20MVL is powered by two sealed 100 amp-hour 12-volt batteries that run a four-brush direct electric motor with a drive speed of up to 3.5 MPH with the platform lowered and 0.6 MPH with it raised. The JLG 20MVL has an automatic power-off battery saver control, a single joystick drive and steer control, and is ANSI, OSHA and CSA compliant.

/ day
/ week
/ month
View Full Specs
AERIAL-PERSONNEL LIFTS
PERSONNEL LIFT-20' DC

Synergy Equipment’s JLG 20MVL is a drivable 19-foot high mobile vertical lift that is used for painting, installing electrical systems and lights, and other high-reach construction and installation projects. The JLG 20MVL is 29.5 inches wide, 53.5 inches long and has a stow height of 78 inches. The 28- by 26-inch platform is wide enough for a worker and tools and can handle up to a 350-pound load. The JLG 20MVL is powered by two sealed 100 amp-hour 12-volt batteries that run a four-brush direct electric motor with a drive speed of up to 3.5 MPH with the platform lowered and 0.6 MPH with it raised. The JLG 20MVL has an automatic power-off battery saver control, a single joystick drive and steer control, and is ANSI, OSHA and CSA compliant.

/ day
/ week
/ month
View Full Specs
AERIAL-PERSONNEL LIFTS
PERSONNEL LIFT-25' DC

Synergy Equipment’s Genie AWP25S is a drivable 24-foot 1-inch high mobile vertical lift with a working height of 30 feet 10 inches that is used for painting, installing electrical systems and lights, and other high-reach construction and installation projects. The Genie AWP25S is 29.5 inches wide, 53.5 inches long and has a stow height of 78 inches. The 27- by 44.75-inch platform is wide enough for a worker and tools and can handle up to a 350-pound load. The Genie AWP25S supported by four outriggers that extend out up to 5 feet 1 inch. The Genie AWP25S is tipped back onto casters for moving.

/ day
/ week
/ month
View Full Specs
Looking for used construction equipment?